1) The goal of the game is to get the block to fall into the square hole at the end of each level. There are 33 levels in total. 2) Use the left, right, up, and down arrow keys to move the block around the world. Be careful not to fall off the edges or the level will restart. 3) Many levels contain bridges and switches. The switches are activated when the block presses them down. You do not need to keep the block resting on the switch to keep the bridge closed. 4) There are two types of switches: heavy x-shaped ones and soft octagon ones. Soft switches (octagons) are activated when any part of the block touches them. Hard switches (x's) require more pressure and can only be activated when the block is standing on its end. 5) When activated, each switch may behave differently. Some will open and close the bridge each time they are used, while others will create a permanent bridge. Green or red colored squares will flash to indicate which bridges are being operated. 6) Orange tiles are more fragile than other tiles. If the block stands on an orange tile vertically, the tile will break and the block will fall through. 7) There is a third type of switch shaped like this: ( ) It teleports the block to different locations and splits it into two smaller blocks at the same time. These small blocks can be controlled individually and will merge back into a normal block when placed next to each other. 8) Press the spacebar to select which small block to use at any time. Small blocks can still activate soft switches, but they are not big enough to activate heavy switches. In addition, small blocks cannot fit through the exit hole – only a complete block can finish the level. 9) Remember the passcode for each level, located in the top right corner. You can skip to specific levels later by going to "Load Stage" in the main menu and entering the 6-digit level code.